Victron energy VE.Net DC Instrukcja Użytkownika Pobierz pdf (Strona 13)

Battery Controller

12.1V 0.0A 100%

DC Voltage

12.10V

Historic data

[Press Enter]

6 Historic data

The VE.Net Battery Controller will keep track of the following variables to enable you to get more

information on the state and the past use of the batteries. This data will be stored in volatile

memory, which means that every time the battery controller is disconnected from the batteries the

values will be reset. It is also possible to reset these values in the “Historic Data” menu.

6.1 Where to find the “Historic Data” menu

Step 1.) Press “Enter” to enter the Battery Controller menu.

Step 2.) Press “▼” to scroll through the menu until you see ‘Historic Data”.

Step 3.) Press “Enter” to enter the Historic data menu

Historic data recorded

Name Unit Description

Deepest discharge Ah The deepest discharge in Ah.

Depth last disch. Ah The depth of the last discharge in Ah. This value will be reset to 0 when the

State of Charge reaches 100% again.

Number of Cycles No. Every time the battery is discharged below 65% of its rated capacity and

charged back to at least 90%, one cycle is counted.

Average discharge Ah The average discharge over all the cycles counted

Full discharges No. The number of times the battery has been discharged to a 0% state of

charge.

Cumulative Ah Ah Records all the discharging amp hours. This value gives an indication of

the chemical change the battery has endured.

Last full charge Day Number of days ago that the battery was fully charged.

Minimum voltage Volt Lowest voltage measured since last reset. Can be used to check that the

batteries haven’t been over discharged.

Maximum voltage Volt Maximum voltage measured since last reset. Can be used to check for

faulty charges and alternators.

1 2 ... 8 9 10 11 12 13 14 15 16

Brak uwag

Victron energy VE.Net DC Instrukcja Użytkownika Strona 13